Zurück
Vor

InterM DIV 9123 Stereo Electronic Crossover / Vorverstärker Rack 19"

Hersteller InterM

Artikel-Nr.: SW10056

Versandkostenfreie Lieferung!

 

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

199,00 € *
 
 
 
 
 

Produktinformationen "InterM DIV 9123 Stereo Electronic Crossover / Vorverstärker Rack 19""

 

http://www.systemels.com/administration/ckeditor/ckfinder/userfiles/images/interm-logo.png
 
 
DIV 9123
 
STEREO ELECTRONIC CROSSOVER
 
 
SPECIFICATIONS
 
ELECTRICAL
0dB=0.775Vrms
Max Output/Impedance .....................+20dB/600Ω, BAL
Input Sensitivity/Impedance...................0dB/20kΩ, BAL
Frequency Response......................20Hz~20kHz(±1dB)
T.H.D .....................................................Less than 0.1%
S/N .........................................................................75dB
Crossover Mode ..................2 Way Stereo/3 Way Mono
Crossover Frequency ..............80Hz~8kHz(Sweepable)
Crossover Cutoff Slope ...................................24dB/Oct
Subwoofer Frequency ...........60Hz~250Hz(Sweepable)
.........................................................................24dB/Oct
High Pass Filter.....................................30Hz, 18dB/Oct
 
GENERAL
Power Source ................AC 120V/230V/240V, 50/60Hz
Power Consumption................................................12W
Weight ......................................................................4kg
Dimensions ...........................482(W)x44(H)x280(D)mm
 
 
FEATURES
 
MODE SELECTION
Electronic Crossover DIV-9123 is available to use in two
modes as follows, and identify the mode state by the
illumination LEDS.
2 WAY STEREO : LOW, HIGH
3 WAY MONO : LOW, MID, HIGH
 
SWEEPABLE FREQUENCY DIVIDING
The sweepable frequency controls are accurately and
uniformly scaled to make them easy to read and set with
frequency ranges chosen to suit every application. The
filter slope is 24dB/oct.
 
MONO SUBWOOFER
Mono summed subwoofer is provided to single woofer
systems with maximum bass impact. The filter slope is
24dB/oct and the filtering frequency is continuously-
variable from 60Hz to 250Hz.
 
HIGH PASS FILTER
High pass filter is provided to protect the amplifiers and
loudspeakers against the subsonic, rumble.
 
OUTPUT MUTE
To setup faster, the MUTE function allows the user to
listen to each frequency band in turn without affecting
level settings on the other channel.
 
GROUND SELECTOR
You can select the ground of input signal lines, normal or lift,

to avoid ground loop problem when user build the system

 

Weiterführende Links zu "InterM DIV 9123 Stereo Electronic Crossover / Vorverstärker Rack 19""

Weitere Artikel von InterM
 
 
 
 

Zuletzt angesehen